The SmallRig 1138 camera clamp review comes down to a practical question: do you need a compact way to position a camera or accessory on an existing support?
This clamp combines a dual ball head, a 1/4-inch screw, and an action camera adapter for small creator setups.
SmallRig 1138 Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A useful fit for creators who need to clamp a small camera or accessory to a tube, rod, table, or frame without drilling.
- Dual ball head with an adjustable connection for positioning cameras and accessories.
- 1/4-inch-20 screw supports compatible cameras, monitors, lights, microphones, webcams, and other gear.
- Clamp is designed for attachment to rods, tubes, tables, frames, and tripods without drilling.
- Maximum weight capacity is 1.5 kg; the assembled gear should remain within this limit.
Pros
- Combines a support clamp and adjustable dual ball head in one compact assembly.
- Includes an action camera adapter alongside the 1/4-inch-20 connection.
Consider before buying
- The 1.5 kg maximum capacity limits it to suitably light cameras and accessories.
- Dynamic use calls for a separate safety rope, adding another setup step.
Read the full review summary
The 1138 is a two-part mounting solution: a clamp grips a compatible rod, tube, table, or frame, while its dual ball head provides an adjustable connection for a camera or accessory.
SmallRig lists a maximum supported load of 1.5 kg and describes an anti-twist structure with non-slip threads, making capacity and secure setup the key considerations when choosing it.
Its broad device compatibility and included action camera adapter make it relevant to desk filming, compact camera rigs, and some vehicle or bike mounting arrangements.
It suits creators who value flexible placement and a small, metal mounting tool, provided their support surface and gear stay within the stated capacity and the setup is appropriate for the motion involved.
The buying factors
SmallRig 1138 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
It can clamp to several kinds of supports and offers a dual ball head for adjusting the mounted device.
Accessory compatibility
The 1/4-inch-20 screw and included action camera adapter support a range of small creator gear.
Load guidance
A maximum load of 1.5 kg gives buyers a useful boundary, though the whole setup should be checked against it.
Portability
At 0.2 kg and under four inches in each listed dimension, it is a compact rig accessory.
Build materials
Aluminum and stainless steel construction is suited to a reusable mounting accessory.
Dynamic-use suitability
The maker advises attaching a safety rope for dynamic scenarios, so moving setups call for extra care.
Key Features and Specifications of SmallRig 1138
- Dual ball head with an adjustable connection for positioning cameras and accessories.
- 1/4-inch-20 screw supports compatible cameras, monitors, lights, microphones, webcams, and other gear.
- Clamp is designed for attachment to rods, tubes, tables, frames, and tripods without drilling.
- Maximum weight capacity is 1.5 kg; the assembled gear should remain within this limit.
- Aluminum and stainless steel construction, with listed product weight of 0.2 kg.
- Package includes the super camera clamp and an action camera mount adapter.
- For dynamic scenarios, SmallRig advises using a safety rope to help prevent accidental drops.
Pros and Cons of SmallRig 1138
Pros
- Combines a support clamp and adjustable dual ball head in one compact assembly.
- Includes an action camera adapter alongside the 1/4-inch-20 connection.
- Can attach to a range of existing supports without drilling.
- Aluminum and stainless steel construction keeps the accessory relatively light.
Consider before buying
- The 1.5 kg maximum capacity limits it to suitably light cameras and accessories.
- Dynamic use calls for a separate safety rope, adding another setup step.
- Before buying, measure the intended support and confirm it suits the clamp and mounting position.
Who Should Buy SmallRig 1138?
Good fit
Consider the 1138 if you often need to move a compact camera or accessory between a desk, rod, tube, or frame.
Its adjustable ball head can help aim a device after clamping, while the 1/4-inch-20 screw and included action camera adapter cover two common mounting approaches.
It is most suitable when your complete mounted setup stays comfortably within the 1.5 kg limit and the support point is stable.
Before committing, check the support dimensions and the device connection you plan to use; for moving setups, include a safety rope as advised.
Who should skip it
Look elsewhere if your planned gear exceeds 1.5 kg, or if your setup requires a dedicated long articulating arm rather than a clamp-mounted ball head.
For filming on a moving vehicle or another dynamic support, use this only if you can secure the setup appropriately, including the recommended safety rope.
How the SmallRig 1138 Fits a Compact Camera Rig
A clamp that makes use of existing supports
The 1138 is designed to attach to a rod, tube, table, frame, or tripod, so it can add a camera position without drilling into a surface. That makes it useful when a permanent mount is impractical.
The support still matters: check that the intended mounting point is compatible and steady before adding equipment.
Positioning through the dual ball head
The dual ball head gives the mounted device an adjustable connection, which can help when framing a desk shot or placing a small accessory around a compact rig.
It is a short mounting assembly, so buyers who need an extended reach should consider whether the clamp's placement alone can achieve the desired angle.
Capacity and safety in context
The stated maximum load is 1.5 kg. Treat that as a limit for the gear attached to the mount, and account for how the device will be positioned and supported.
For dynamic scenarios, the maker specifically recommends a safety rope; a clamp connection should not be treated as a substitute for that precaution.
The included adapter and material choice
The package includes an action camera mount adapter as well as the clamp, broadening its usefulness for compatible action cameras. Aluminum and stainless steel keep the assembly's listed weight to 0.2 kg, a practical consideration for portable rigs.
Confirm that the adapter and device connection match your specific setup before purchase.
Alternatives to SmallRig 1138
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 9.8-Inch Magic Arm Clamp Kit
Choose the 1138 for a compact clamp-mounted setup with an included action camera adapter.
Consider the 2732 if you need a longer articulating arm and want the clamp's additional thread sizes; check its 15–54 mm opening against your support.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm, has 1/4-inch and 3/8-inch clamp threads, and offers double 360-degree ball-head adjustment.
- Its clamp opening is listed from 15 to 54 mm.
- The 1138 combines its clamp with a dual ball head and includes an action camera adapter; its maximum load is 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 1138 is the more direct fit when you need one clamp point and its stated capacity is sufficient.
The 4103 may suit a heavier or two-point mounting need, provided its rod range fits your rig and its double-clamp arrangement is appropriate.
- The 4103 uses two clamps, supports rods from 14 to 60 mm in diameter, and lists a maximum load of 3.5 kg.
- Its double ball head supports 360-degree adjustment.
- The 1138 uses a single clamp and a dual ball head for devices up to 1.5 kg.
Is SmallRig 1138 Worth It?
The SmallRig 1138 is worth considering for creators who want a compact, adjustable clamp mount for light cameras and accessories.
Its range of possible support points and included action camera adapter make it a flexible addition to a small rig.
Buy if your device and support match the mounting setup and remain within the 1.5 kg maximum.
For dynamic use, plan for the recommended safety rope; if you need a longer arm or more capacity, compare alternatives designed for those requirements.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A useful fit for creators who need to clamp a small camera or accessory to a tube, rod, table, or frame without drilling.
- Dual ball head with an adjustable connection for positioning cameras and accessories.
- 1/4-inch-20 screw supports compatible cameras, monitors, lights, microphones, webcams, and other gear.
- Clamp is designed for attachment to rods, tubes, tables, frames, and tripods without drilling.
- Maximum weight capacity is 1.5 kg; the assembled gear should remain within this limit.