The SmallRig Cold Shoe Mount review centers on a practical rigging accessory: a two-pack of compact aluminum mounts for adding a microphone, flash, or LED to compatible camera cages and handles.
Its appeal is straightforward attachment and a spare mount in the package, with fit and thread compatibility worth checking before purchase.
SmallRig Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical choice for camera cage users who need straightforward cold shoe points for a microphone, flash, or LED accessory.
- Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
- Aluminum alloy construction keeps the mount compact while providing a rigid shoe interface.
- Mounting is described for accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- A 1/4-inch threaded hole supports attachment to compatible camera cages, plates, handles, and other rig accessories.
Pros
- A two-pack can provide two accessory locations or a spare for another rig.
- Small dimensions make it suitable for adding a shoe to a crowded cage or handle.
Consider before buying
- Compatibility depends on the actual threaded holes and available clearance on the cage, plate, or handle.
- This is a fixed mount, so buyers who need to tilt or reposition an accessory should check for an adjustable design.
Read the full review summary
The SmallRig Cold Shoe Mount 2060 is designed to add a standard cold shoe interface to camera accessories with 1/4-inch or M2.5 threaded holes.
Each mount is about 25 by 25 mm and made from aluminum alloy, with bent bevels at one end intended to help keep an attached accessory from sliding off accidentally.
The arrows marked on the surface indicate the mounting direction.
This set suits people building a fixed camera rig who want a simple place for a small microphone, flash, or LED.
Two mounts, screws, and hex spanners are included, so the package supports more than one mounting point or leaves a second unit available.
Before choosing it, confirm the cage or plate has a compatible mounting point and note the listed exclusions for DJI and Zhiyun gimbals.
The buying factors
SmallRig Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting compatibility
The 1/4-inch and M2.5 attachment options cover common threaded rigging points, subject to the specific cage or accessory design.
Accessory support options
The cold shoe can provide a mounting point for a microphone, flash, or LED, as long as the accessory uses a compatible shoe.
Package utility
Two mounts plus the listed screws and two hex spanners make this useful for rigs needing multiple attachment points.
Rig footprint
At roughly 25 by 25 mm, each mount is compact enough to add a shoe without taking up much surface area.
Installation clarity
The marked arrows and included hardware help guide setup, although buyers still need to match the fastener to their mounting point.
Specialized rig flexibility
The design is a fixed shoe mount rather than an angle-adjustable head, and the description excludes DJI and Zhiyun gimbals.
Key Features and Specifications of SmallRig Shoe Mount
- Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
- Aluminum alloy construction keeps the mount compact while providing a rigid shoe interface.
- Mounting is described for accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- A 1/4-inch threaded hole supports attachment to compatible camera cages, plates, handles, and other rig accessories.
- The package includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Two white arrows indicate mounting direction, while bent bevels at one end are intended to help prevent accidental removal.
Pros and Cons of SmallRig Shoe Mount
Pros
- A two-pack can provide two accessory locations or a spare for another rig.
- Small dimensions make it suitable for adding a shoe to a crowded cage or handle.
- The package includes more than one screw type and the tools needed to install them.
- The shoe interface supports common rig accessories such as microphones, flashes, and LED lights.
Consider before buying
- Compatibility depends on the actual threaded holes and available clearance on the cage, plate, or handle.
- This is a fixed mount, so buyers who need to tilt or reposition an accessory should check for an adjustable design.
- The stated exclusions for DJI and Zhiyun gimbals limit its suitability for those setups.
- For most cages, the instructions call for the included 1/4-inch-20 screw; the M2.5 threads are only needed in the noted exception involving SmallRig Full Cage 1661.
Who Should Buy SmallRig Shoe Mount?
Good fit
Consider the SmallRig Cold Shoe Mount 2060 if you want a compact, fixed cold shoe on a camera cage, plate, or handle with a compatible 1/4-inch or M2.5 threaded point.
It is especially useful when adding a microphone, flash, or LED is more important than changing the accessory's angle.
The two-unit pack is convenient for a rig that needs separate positions for multiple accessories, or for keeping another mount available for a second setup.
Check that the mounting surface has room for the roughly 25 mm square base and that the accessory's shoe fits the mount.
Review the fastener instructions for your specific cage before installing: the supplied 1/4-inch-20 screw is the intended choice for most cages, while the product notes a special case for SmallRig Full Cage 1661.
If your setup involves a DJI or Zhiyun gimbal, this mount is not designated for that use.
Who should skip it
Skip this design if the main requirement is an adjustable angle or quick repositioning; its described function is a fixed shoe mount. Consider whether a ball-head style would better suit that workflow.
Choose another mounting approach if your cage or accessory lacks a compatible threaded hole, or if you are attaching it to a DJI or Zhiyun gimbal.
How the SmallRig Shoe Mount Fits a Camera Rig
A simple way to add an accessory point
This mount addresses a common rigging need: turning an available threaded point on a cage, plate, or handle into a cold shoe location. That keeps the job focused on compatibility and placement.
Measure the available surface and consider nearby controls, cables, or other gear so the mounted accessory has usable clearance.
Thread choice matters during installation
The package supplies both 1/4-inch-20 screws and M2.5 screws, but the product instructions distinguish how they are used.
Most cages are described as needing the 1/4-inch-20 screw, with the M2.5 threading unnecessary except for the specified SmallRig Full Cage 1661 case.
Match the screw to the mount point rather than assuming both thread types are used together.
The bevels and arrows support orientation
The arrows printed on the mount show its intended orientation, and the bent bevels at one end are designed to help prevent an accessory from coming off accidentally.
These are useful cues when positioning the mount, but secure installation still depends on using the right threaded point and tightening the fastener appropriately for the rig.
Fixed positioning favors uncomplicated setups
A fixed cold shoe can keep a microphone, flash, or LED in a stable chosen position without adding an adjustment joint.
That suits a straightforward cage build, while a setup that needs frequent tilt changes may call for a different mount.
The product description also rules out DJI and Zhiyun gimbal use, so gimbal owners should verify their mounting system before considering it.
Alternatives to SmallRig Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter 1135
Choose the 2060 for compact, fixed shoe positions or when you want two mounts in one pack.
The 1135 is a better fit when angle adjustment is useful and its ball-head format matches the rig; observe its stated weight recommendation for monitors and LED lights.
- The Double Ball Head Adapter 1135 uses a double ball head that can rotate up to 180 degrees and lock with a side wingnut; it includes a shoe base and 1/4-inch screws on both ends.
- Its recommended maximum weight for a monitor or LED light is 1 kg.
- The SmallRig Cold Shoe Mount 2060 provides a fixed shoe point on a compatible threaded rig accessory, and the pack includes two mounts.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Mount 3577
The 3577 suits buyers who want to tilt a lighter accessory and value its small ball-head design. The 2060 is the more relevant choice when a fixed mount is sufficient and having two mounts is useful.
- The 3577 is a compact mini ball-head mount that tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g.
- It has a 1/4-inch screw for a light or microphone and a cold shoe adapter at its base.
- The 2060 is a fixed cold shoe mount designed to attach to a compatible threaded hole, with two mounts included.
Is SmallRig Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering for a simple camera cage or handle setup that needs one or two fixed accessory shoe points.
Its compact aluminum mounts, two-piece pack, and included fasteners make it a practical rigging option when the mounting threads and accessory shoe are compatible.
Check the cage's thread and clearance, follow the product's screw guidance, and avoid it for the listed DJI and Zhiyun gimbal use. If angle adjustment matters more than a fixed shoe position, choose a ball-head style mount instead.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical choice for camera cage users who need straightforward cold shoe points for a microphone, flash, or LED accessory.
- Two cold shoe mounts are included, each measuring approximately 25 by 25 mm.
- Aluminum alloy construction keeps the mount compact while providing a rigid shoe interface.
- Mounting is described for accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- A 1/4-inch threaded hole supports attachment to compatible camera cages, plates, handles, and other rig accessories.